400W 12000rpm ER11 Chuck CNC Brushless Spindle Motor with Driver Speed Controller and Clamp

400W 12000rpm ER11 Chuck CNC Brushless Spindle Motor with Driver Speed Controller and Clamp
  • Sellerwww.questcom.us
  • List PriceUS$99.99piece
  • Sale PriceUS$99.99piece
  • ShippingFree Shipping
  • Ratings3,6 (642)

Product Description

Description:
400W 12000rpm ER11 Chuck CNC Brushless Spindle Motor with Driver Speed Controller and Clamp for Engraving

Specification:
Brushless motor parameters
Colorblack and silver
Working voltage48V DC
Power400W
Speed12000 r/min
Distance0.45 (N.m)
Insulation resistance> 2 ohms
Insulation dielectric strength400V
Diameter55 mm
Axis collet length43mm
Diameter of Axis collect holder16mm
Repeat accuracy0.01-0.03mm
ER11 collect3.175mm
Spindle net weight1.1 KG
Brushless DC speed driver controller parameters
ModelWS55-180
ColorBlack
Rated voltage20-50VDC
Rated current8A
Limited current10A
Maximum speedOver 20000RPM
Speed control1.Regulation resistance,
2.External voltage:10VDC
Alarm output: AL signalThis port and the ground have a 5V alarm output output
Power lightGreen LED (the led is on once power on)
Operation condition lightRed LED (The led flash one times continuas when the device is suspended)
Insulation resistance>100MΩ at normal temperature and pressure
Insulation strength0.5KV, 1 minute at normal temperature and pressure
Storage temperature-20℃- +65℃
Storage humidity0-95%RH
Working temperature0-45℃
Working humidity< 80%,No frost, frost free
Working Vibrating5.9m/S² MAX
Dimension96x68x36mm
WeightApprox. 195g
Spindle fixture (Higher precision, low deformation rate, smooth inner wall)
MaterialCast aluminum
ColorSilver
Bore diameter55mm
Total Size90x40x65mm
Features:
Brushless motor
1. B rushless, low interference, in addition to the brushless motor brush, the most immediate change is no brush spark generated when the motor running, thus greatly
reduce the electric spark interference of remote radio equipment.
2. Low noise, smooth operation, brushless motor without brush, less friction force during operation, smooth operation, low noise will be many.
3. Long life and low maintenance costs, less brush, brushless motor wear is mainly on the bearing, from the mechanical point of view, brushless motor is almost a free maintenance of the motor.
Speed driver controller
Speed/Current alike close loop technology, smooth rotation.
Pure hardware design, high-speed, high noise immunity.
F/R(forward / reverse control) Rotation, soft shift function.
Over current, short circuit protection (red LED indicator).
Package Included:
1 x Spindle motor with with ER11 3.175 collet
1 x WS55-180 Speed driver controller (With potentiometer and switch)
1 x Spindle fixture (Includes 4 fixing screws)
1 x English manual
More Details:

400W 12000rpm ER11 Chuck CNC Brushless Spindle Motor with Driver Speed Controller and Clamp

400W 12000rpm ER11 Chuck CNC Brushless Spindle Motor with Driver Speed Controller and Clamp

400W 12000rpm ER11 Chuck CNC Brushless Spindle Motor with Driver Speed Controller and Clamp

400W 12000rpm ER11 Chuck CNC Brushless Spindle Motor with Driver Speed Controller and Clamp

400W 12000rpm ER11 Chuck CNC Brushless Spindle Motor with Driver Speed Controller and Clamp

400W 12000rpm ER11 Chuck CNC Brushless Spindle Motor with Driver Speed Controller and Clamp

400W 12000rpm ER11 Chuck CNC Brushless Spindle Motor with Driver Speed Controller and Clamp

400W 12000rpm ER11 Chuck CNC Brushless Spindle Motor with Driver Speed Controller and Clamp

400W 12000rpm ER11 Chuck CNC Brushless Spindle Motor with Driver Speed Controller and Clamp

400W 12000rpm ER11 Chuck CNC Brushless Spindle Motor with Driver Speed Controller and Clamp